Cognex In-Sight 7600, Reference Manual

Page: 94 / 113

I/O Module Cable
The I/O Module cable connects the vision system directly to a compatible I/O module via the DB15 connector. When the
I/O module is used, all power and communication lines used by the vision system are connected using the I/O Module
cable.
P1 Pin# Signal Name Wire Color Signal Name P2 Pin#
1 IN 2 / HS OUT 2 Yellow Not Used Not Used
2 RS-232 TRANSMIT White/Yellow RS-232 RECEIVE 7
3 RS-232 RECEIVE Brown RS-232 TRANSMIT 6
4 IN 3 / HS OUT 3 White/Brown Not Used Not Used
5 IN 1 Violet Not Used Not Used
6 COMMON IN White/Violet TRIGGER- 3
7 +24VDC Red +24VDC 1
8 GND Black -24VDC 8
9 COMMON OUT Green -24VDC 8
10 TRIGGER Orange 2
11 HS OUT 0 Blue HS OUT 0 4
12 HS OUT 1 Grey HS OUT 1 5
Note : Cables are sold separately.
94
Specifications