5. To install the new ring light, align the screws with the threaded screw holes on the vision system. Also align the
pins on the back of the ring light with the connector on the vision system, but do not attempt to connect the pins.
6. Using a screwdriver, tighten the screws until they are partially threaded.
7. Gently press down on the ring light to connect the pins on the back of the ring light to the vision system.
CAUTION
:
If the screws are not partially threaded prior to connecting the pins, the pins may bend or break.
8. Using a screwdriver, finish tightening the screws.
a. If installing a ring light that uses nylons screws, gently tighten the screws until a slight change in
resistance is detected.
CAUTION
:
Use caution when tightening the nylon screws, to ensure the screws do not become
stripped.
b. If installing a ring light that uses stainless steel screws, the maximum torque is 0.56 Nm (5 in-lb).
9. Reattach the lens cover.
10. Restore power to the 24VDC power supply and turn it on if necessary.
19
Replace the Ring Light
