6. To install the new ring light, align the screws with the threaded screw posts on the vision system. Also align the
pins on the back of the ring light with the connector on the vision system, but do not attempt to connect the pins.
7. Gently press down on the ring light to connect the pins on the back of the ring light to the vision system.
8. Using a screwdriver, tighten the screws until they stop turning; the maximum torque is 0.56 Nm (5 in-lb).
9. Reattach the lens cover.
10. Restore power to the 24VDC power supply and turn it on if necessary.
17
Replace the Ring Light
