Physical Layout of the Base Station
DMA-IBASE-BT-02
1
Base station status indicators
2
PAIR sticker - Reading the code pairs the base station with
the device
3
Connection point to the reader:
l
pairing reader and base station
l
non-wireless communication
l
charging
4
RS-232
5
USB
6
Power plug (24V, max. 15W)
7
Alternative power supply connector (24V, max. 15W,
polarity marked on the plastic part near the connector).
Recommended wire diameter is 14- 18 AWG
8
Ethernet
Base station status indicators:
l
Power: RED = base powered / BLINK = wrong reader in base
l
Communication: BLUE = Wireless link / BLINK = Wireless communication
l
Cradle connections: GREEN = reader properly inserted / BLINK = cradle USB interface communication
Note
:
l
DMA-IBASE-BT-02 supports Ethernet
8
Getting Started
