![background image](http://html1.mh-extra.com/html/cognex/cov-7000-cmnt/cov-7000-cmnt_reference-manual_2634785051.webp)
5. The light housing contains four captive screws that are accessible via captive screw access holes in the LED ring
light board. Use a 2mm hex wrench to loosen the four captive screws and remove the light housing.
CAUTION
:
l
Do not hot-plug the LED ring light. Verify the vision system is not receiving power when connecting
or disconnecting the LED ring light.
l
A connector protrudes from the underside of the light housing and can be damaged if placed on a
hard surface.
6. Use a 1.5mm hex wrench to loosen the three captive screws in the autofocus module and remove the autofocus
module from the vision system.
CAUTION
:
Do not hot-plug the autofocus module. Verify the vision system is not receiving power when
connecting or disconnecting the autofocus module.
51
Installation