Cognex 800-5815-1, Installation And Reference Manual

Page: 28 / 57

Specifications
16
3.1 General Specifications
3.2 Acquisition Trigger Input
The 1460 I/O Expansion Module provides access to the supported vision sensor’s high-
speed, opto-isolated acquisition trigger input. Unlike the general-purpose inputs, the acquisi-
tion trigger input is wired directly to the CCD imager circuitry, thus bypassing the sensor’s
operating system. The 1460 I/O Expansion Module’s micro controller also monitors the
acquisition trigger input (Figure 3-1).
Table 3-1: 1460 I/O Expansion Module General Specifications
SPECIFICATION DESCRIPTION
Compatibility In-Sight 3400 and In-Sight 5000 Series Vision Sensors
I/O Trigger 1 opto-isolated, acquisition trigger input
Inputs 8 opto-isolated discrete (general-purpose)
Outputs 10 opto-isolated discrete (2 high-speed, 8 general-purpose)
General purpose Outputs – Maximum 60V dc, 2 Amps resistive, derated
at -33mA/C for surrounding air temperatures above 25°C
Communications Serial 1 RS-232C port (1200 to 115,200 baud rates)
RxD, TxD, and Flow control (RTS/CTS)
Status LEDs 1 each for power, external lights, acquisition trigger, inputs and outputs
1 each for Camera and Remote RS-232
Mechanical Housing Black plastic
Mounting #3 DIN-rail (35 mm)
Dimensions Width: 269.2mm (10.6"), Depth: 125.4mm (4.94"), Height: 63.5mm (2.5")
Terminal Block 26 to 16 AWG
Maximum torque 0.3 Nm (2.7 in-lb)
Weight 737.1 g (26 oz.) Opto-isolators and fuses installed, w/o retention bar.
Power Camera
24VDC ±10%, 1.25 Amps, 30W supply
1
1.
Maximum draw when the 1460 I/O Expansion Module supplies power to an In-Sight sen-
sor, and when all inputs, outputs, and LED indicators are in use. Draw will be less than
30W under typical usage.
Light Input 12VDC to 24VDC
Light Output 12VDC to 24VDC
Environmental Temperature 0 to 50C (operating), -10 to 65C (storage)
Humidity 10 to 90%, non-condensing (Operating and Storage)
Shock 30Gs per IEC 68-2-27 (Pending)
Vibration 2Gs per IEC 68-2-6 (Pending)
Certifications CE, UL, FCC