COFFEtek NEVA 4, Technical Manual

Page: 18 / 40

COFFE tek LTD
NEVA 4 Issue 1 22/02/08 18
S
ELECT
D
RINK TO
M
ODIFY
Ingredient/Water/Whipper Adjustments Program concept
17. The central concept behind the Coffetek NewGeneration software is that each individual
drink button can be programmed to have any combination of ingredients present in the
machine in its recipe. Therefore scrolling down the list of settings for a given button, start
and run durations for each motor, mixer and valve will be seen. This can be disconcerting
to those unfamiliar with this approach. Since any button can be configured to produce
any drink, limited only by the available ingredients, a facility to change the name of the
drink displayed when the button is pressed is also included in this section. Other control
parameters that apply specifically to the beverage associated with each specific selection
button are included in these menus.
18. The SELECT DRINK TO MODIFY option allows modification of individual drink timings.
(1) First select the drink; e.g. Product A. The display will show:
DRINK 03 NAME IS
PRODUCT A
If name is correct move to step 4.
(2) Press ENTER. The display will show:
PRODUCT A
¿ , À
ENTER OR ESC
(3) Press
¿
to scroll other drink name options available or press
À
to return to Product
A. Press ENTER to enter new option.
(4) If drink name is correct, use
¿
,
À
to step through program. The display will show:
USES NOZZLE
000
19. The machines software is capable of dispensing up to three beverages at one time.
Of course the mechanics of the machine must be such that this is possible. That is to
say, as a minimum it must have more than one dispense head! Otherwise several
beverages would emerge at the single dispense head at the same time with obviously
unsatisfactory results. The software allows for three dispense heads 0, 1 & 2. Only one
drink assigned to each nozzle will be allowed at any time. As the Neva 4 only has 1
nozzle, all drinks should be programmed to use Nozzle 0.