9. Maintenance and Cleaning
TOWER.
Weekly Cleaning
Cleaning
- To keep the
serving stations
clean. It is effective to
start a half brew
with water only.
- This will disolve the coffee remains.
- Empty the serving station by opening the tap and this will also be cleaned.
- Repeat this every day.
- Dismount the level tube and clean it every week with the enclosed brush.
Cleaning with cleaning powder
Article no. 1104162
CLEANING OF SERVING STATION 5 LITRE.
Fill the serving station. ( Full brewing without coffee and filter ).
Put 2 tablespoons with cleaning powder in the serving station
and wait at least 15 minutes.
Tap off 2/3 of the cleaning solution.
Clean the serving station with the following cleaning brush.
IMPORTANT!
Rinse the serving station on the inside several
times with fresh tap water.
Observe!
The filter holder and
serving station
should be cleaned every day.
Rinse the
serving station
before each new brewing.
Do not use
strong liquid solution when cleaning the brewer unit and
serving station.
29
.
Summary of Contents for TOWER
