ORIGINAL LINE M
19
Original instructions.
INSTALLATION AND START-UP
Positioning
Electrical connection
Place the machine on a water-resistant, horizontal surface that will support
the weight of the machine.
Important:
Connect the plug to an earthed wall socket.
110-120V / 220-230 V 50-60Hz, 10 Amp.
M-1, M-2, THERMOS M, MEGA GOLD M
DM-4
The brewer is not reconnectable and may only be installed to the electric
supply network with a voltage that is stated on the brewer and shall be carried
out by an authorized electrician.
Recommended: install a line circuit breaker and an earth fault breaker to the
machine.
WARNING!
-Brewer should be connected to 110V / 220V with neutral and ground.
- Use 10 Amp fuses.
Important:
Electrical installations must be done by a qualified person.
Min. 10cm
Min. 10cm
Note:
Make sure air is able to circulate behind the machine
(minimum 10cm).
i
