Coemar Softlite LED RGBW Instruction Manual Download Page 5

5

Congratulations on having purchased a 

Coemar

 product. You have assured yourself of a 

fixture of the highest quality, both in componentry and in the technology used. We renew 
our invitation to you to complete the service information on the previous page, to expedite 
any request for service information or spares (in case of problems encountered either during, 
or subsequent to, installation). This information will assist in providing prompt and accurate 
advice from your 

Coemar

 service centre. Following the instructions and procedures outlined 

in this manual will ensure the maximum efficiency of this product for years to come.

1. 

Packaging and transportation

1.1 

Packaging

Open the packaging and make sure that no part of the equipment has suffered any damage 
during the transportation. In case of damage to the fixture, contact your currier and your 
supplier immediately by telephone, fax or email, and inform them you will formally notify 
them in writing through registered letter.

Packing list

Make sure the packaging contains:

1 SoftLite Led RGBW
1 Instruction manual 
1 Main power plugs

2

. General information

2.1 

Important Safety information

Fire prevention:

1. 

Never locate the fixture on any flammable surface.

2. 

Minimum distance from flammable materials: 0,5m.

3. 

Minimum distance from the closet illuminable surface: 0,5m.

4. 

Replace any blown or damaged fuse only with those of identical values.   
Refer to the schematic diagram if there is any doubt.

5. 

Connect the projector to mains power protected by a thermal magnetic 
circuit breaker.

Prevention from electric shock:

1. 

Presence of high voltage inside of the fixture. Insulate the projector from 
mains supply before opening or performing any function which involves 
touching the inside of the fixture, including lamp replacement.

2. 

For the connection to the mains, adhere strictly to the guidelines outlined 
in this manual.

1.2

 

Transportation

The 

SoftLite Led RGBW

 must be transported exclusively in its original packaging or in an 

appropriate flight case.

Summary of Contents for Softlite LED RGBW

































Reviews: