Coemar Softlite LED RGBW, Instruction Manual, Page: 11 / 32

11
5.
Powering up
5.3
Supply cable characteristics
The supply cable complies to the most recent safety norms.
5.2
Connection to mains power
Mains cable characteristics
The mains cable provided is thermally resistant, complying to the most recent International
standards.
Note: in case of cable replacement, similar cable with comparable thermal resistant
qualities must be used exclusively (cable 3 X 1,5 ø external 10 mm, rated 300/500V, tested
to 2 KV, operating temperature -40°C + 180°C,
Coemar cod. CV5311).
Connection to mains power
SoftLite LED RGBW is equipped with two power connectors, one as input and one as
output, which can be used to feed up to 10 (at 230 VAC) or 5 (90 VAC) fixtures.
The max absorption of
SoftLite Led RGBW is reported in the following table:
- 230 VaC 1,3 A constant during normal exercise.
- 115 VaC 2,6 A constant during normal exercise.
5.1
Operating voltage and frequency
The unit may operates at voltages ranges from 115 to 250VaC at a frequency of
50 or 60 Hz. It is not needed to effect any setup procedures:
SoftLite Led RGBW will
automatically adjust its operation to suit any frequency or voltage within this range.