4
Congratulations on having purchased a Coemar product. You have assured yourself of a fixture of the highest
quality, both in componentry and in the technology used. We renew our invitation to you to complete the service
information on the previous page, to expedite any request for service information or spares (in case of problems
encountered either during, or subsequent to, installation). This information will assist in providing prompt and
accurate advice from your Coemar service centre. Following the instructions and procedures outlined in this
manual will ensure the maximum efficiency of this product for years to come.
1.
Packaging and transportation
1.1
Packaging
Open the packaging and make sure that no part of the equipment has suffered any damage during the
transportation. In case of damage to the fixture, contact your courier and your supplier immediately by
telephone, fax or e-mail, and inform them you will formally notify them in writing through registered letter.
Packing list
Make sure the packaging contains:
1 Mini ReLite Led
1 Instruction manual
2
. General information
2.1
Safety informations
Fire prevention:
1.
N
ever locate the fixture on any flammable surface.
2.
Minimum distance from flammable materials: 0,5 m.
3.
Minimum distance from the closet illuminable surface: 0,5 m.
4.
Replace any blown or damaged fuse only with those of identical values. Refer to the sche-
matic diagram if there is any doubt.
5.
Connect the projector, where
Mini ReLite Led
is installed, to mains power protected by a
thermal magnetic circuit breaker.
Prevention from electric shock:
1.
Presence of high voltage inside of the fixture. Insulate the fixture from mains supply be-
fore opening or performing any function which involves touching the inside of the fixture,
including lamp replacement.
2.
For the connection to the mains, adhere strictly to the guidelines outlined in this manual.
1.2
Transportation
The
Mini ReLite Led
must be transported exclusively in its original packaging.
