11
10.
Usage warnings
1.
The
Mini ReLite Led
supports the pre-heat function of traditional dimmers. For this reason, we advise you to
activate the pre-heat function when possible.
2.
The strobe function is not allowed.
3.
When the preheat is active the
Mini ReLite
’s shutdown and its ignition can not be less than one second, in case
the preheat is not active, the shutdown and its ignition can not be less than four seconds.
4.
If only some
Mini ReLite Led
are connected to a power unit of a certain size (2000 W), an additional com-
ponent called
dump load resistor
is required, which will charge other watts to activate the triacks. This device
will be inserted into the power cord, thus dissipating the watt needed to ensure it will turn on. Alternatively, if a
more or less high number of
Mini Relite Led
are connected together, the same effect will be obtained.
5.
The ideal percentage of dimming can go from
30/35
to
100%
without the previously mentioned
dump load
resistor
; if this is implemented, the percentage of dimming improves by about
10%
.
