English
14
8. Display panel functions
By suitably using all the functions of
Infinity ACL M
, which
can be activated through its display panel, it is possible to change
some of the parameters and to add some functions.
Changing the preset settings made by Coemar can vary the functions of the projector so that it will respond differently to the
controller; therefore carefully read about the functions described hereunder before carrying out any possible selection
.
8.1 Quick guide to menù
In order to access the functions, just press the menu button: the screen you see hereunder, divided into four sections, will appear;
the sections will be shown cyclically, one by one, every time the + or – button is pressed. To select the desired function, press
enter
.
8.2 Rapid count
By the display panel of
Infinity ACL M
It is possible to rapidly change the various numbers displayed for the different functions in
the following 3 manners:
1.
Pressing the + or – buttons will cause the count to be quicker.
2.
Pressing first + and then – and then holding them down simultaneously will cause the numbers to jump to the highest value.
3.
Pressing first – and then + and then holding them down simultaneously will cause the numbers to jump to the lowest value.
DISPLAY SETUP
-
allows the management
of:
-
brightness
-
positive or negative graphic
-
backlight shutdown time.
-
buttons shutdown time.
-
rotazione del display a 180°
MAIN FUNCTIONS:
groups the main setup
functions of the fixture: pan/tilt
management, lamp
management, fans
management, reset, motors test, ID code,
back to original settings and access to
“SPECIAL MODE “.
MEASURES
-
allows the reading of all
functional settings of the fixture:
temperatures, fans power, DMX channels
values, diagnostics, lamp status and life
and diagnostic version of the installed
software.
DEMO
-
allows the performing of the
demonstration program. 4 different demo
programs are available.
DISPLAY
SETUP
MAIN
FUNCTIONS
MEASURES
DEMO
