Pag. 6
http://www.coef.it
-
2.3 MACHINE INSTALLATION
To fix the
PERFORMANCE 1200 DVP
is necessary, when the installation has to be on a raised-
from-the ground support, to block the fixing bracket of the unit by means of a screw provided with nut and
locknut measuring not less than
M10X50
, to insert in the central pre-arranged hole on the fixing bracket.
In order to guarantee a necessary security and in respect of the actual safety rules concerning the
projectors’ installation, it is compulsory to install a safety-chain (or steel cable), equipped with spring
clips, to connect the
PERFORMANCE 1200 DVP
‘s body to the fixing structure.
ATTENTION:
the safety-chain must be properly installed and fixed to the supporting structure, in a
way that an incidental givin in of the main bracket would leed to the shortest possible fall of the projector.
After such an intervention the safety-chain must be replaced.
ATTENTION: COEF is not responsible for installations not correctly made or made without respec-
ting the above indications: those installations are considered dangerous.
When you need to disassemble the fixing bracket of the
PERFORMANCE 1200 DVP
, refer to figure
to re-assemble correctly the bracket with all its components, without damaging its functionality and secu-
rity.
