Pag. 4
http://www.coef.it
-
We recommend you read the entire manual very carefully, particularly the sections concerning correct
installation and safety procedures. This manual is an integral part of the supplied apparatus, therefore you are
requested to keep it with care for future reference.
This manual has been organized in order support the user, the installer or the maintenance operator of the de-
scribed unit with those necessary informations for a correct use of the installation and working procedures of the
same unit.The various procedures will be just signalled by indicators (when necessary) evidencing the operation
dangers and the necessity of technical support.
Please find here below a list of symbols and relative meaning:
OPERATOR :
Not particulary qualified staff, that can operate when no specific knowledge is required
COEF OPERATOR
: Technical staff, qualified and trained by the constructor, for repair and extraordinary
operations.
MECHANICAL OPERATORS
: Staff employed in the ordinary mechanical maintenance.
ELECTRIC OPERATORS
: Staff employed in the ordinary electric maintenance.
SPECIALIZED MECHANICAL OPERATOR
: Qualified staff employed in extraordinary authorized in-
stallations and repair.
SPECIALIZED ELECTRIC OPERATORS:
Qualified staff employed in extraordinary authorized instal-
lations and repairs.
DANGER SIGNAL:
Generic danger signal and electric shock danger signal .
1.0 HOW TO USE THE MANUAL
1) Make sure that all the fastening parts of the spotlight are in good condition. Regulate the proportions of the fastening acces-
sories (screws, bushes, nuts, supports, etc.) in order to be slightly over-dimensioned as compared to the actual requirements.
2) Do not install the projector outside where the influence of atmospheric factors could damage the unit working (rain, wind,
intense heat etc.).
3) Do not clean the projector using water jets or immersion in different liquids. Scrupulously follow the indications given in the
chapter MAINTENANCE.
4) Make the electric connections and the installation / replacement of the lamp after having disconnected the power supply and
after haved positioned the power switch to OFF.The apparatus is classified as belonging to Class 1 type of protection against
electric shocks. Its connection to an earthed mains unit is compulsory. You are recommended to equip the system with aptly
dimensioned differential switches.
5) Do not touch in any case the internal and external parts of the projector without previous authorization of the constructor
and make modifications only by the intervention of qualified staff.
6) Make sure that the projector is correctly fixed on the support as indicated in par.2.3.
7) If the bulb explodes, the particular design of the apparatus prevents the splinters from going outside the projector. All the
parts, therefore, shall be complete and perfectly assembled. The lenses, if visibly damaged, shall be replaced by original spare
parts.
8)
Minimum distance from illuminated objects:
The projector must be positioned in such a way that objects struck by the
light beam are located at least 2 metres from the projector objective.
9)
Minimum distance from inflammable materials:
0.1 meters
10)
MAX ambient temperature:
38° C.
1.1 ADVICES FOR A CORRECT INSTALLATION
2 mt.
