3. Insert the screw through the mounting bracket and
tighten to the SLS-WAVE scanner with the L-key.
4. Next, remove the protective film liner from the SLS-
WAVE. Attach the SLS-WAVE assembly to the clamp
mount assembly, already attached to the monitor, by
rotating the platform thumbwheel as shown below.
5. SLS-WAVE mounted to the left-side of the monitor.
6. Insert the SLS-WAVE USB into the AIMS computer.
WARNING: The scanner should be pointing down and
positioned to keep the scanner light from shining in the
patient’s or user’s eyes.
Note: USB extension cords are available if required to
reach from the SLS-WAVE to the AIMS computer. They
can be ordered using Codonics Part Number SLS-
WAVE-USB-EXT.
