Place the inside rose mounting plate over the spindle ensuring to pass the latch retractor cable through the piercing in the
plate.
See diagram.
Secure the inner rose mounting plate against the door and into the front plate using the two fixing bolts.
See diagram.
6 INSTALL INNER MOUNTING PLATE
Hold inner mounting plate against inside of door, passing power cables through hole in center of plate.
Note: See diagram,
make sure cables are not pinched.
Pass two inner mounting bolts through plate and door into the frontplate and tighten.
7 CONNECT WIRES
Connect the orange/black wire to the latch retractor cable, routing wire under clip provided.
See diagram.
Connect red/black wire to the battery.
Push any excess cable back into hole through door.
8 INSTALL BACK PLATE
Position back plate over retractor spindle, ensuring it fits flush to door.
Secure back plate with two short mounting bolts and two through mounting bolts.
See diagram.
Codelocks - CL6010 Lock Installation
http://www.codelocks.co.uk/Locks-Technical-Support/CL6010-Lock-Ins...
3 of 5
21/11/2011 11:44