background image

Document Version: 0.2 

Status: 

Draft

 

 

Page 

3

 of 

9

 

Note:

 The Sub-Master Code is 8 digits in length 

#Master Code 

 02 

 New Sub-Master Code 

 New Sub-Master Code 

••

 

#123456789 

 02 

 44556677 

 44556677 

••

 

Result: The Sub-Master Code has been updated to 44556677 

Delete the Sub-Master Code 

Deletes the Sub-Master Code 

#Master Code 

 03 

••

 

#12345678 

 03 

••

 

Result:

 The Sub-Master Code has been deleted 

Enable & Configure Code-Free Mode 

Configures the lock to allow code free passage where no code, card or phone is needed to open the lock. Up to 10 Code-
Free times can be added. Each period can be set to work on one or more specific days. 

Note: 

Code-Free takes priority over any other setting except lock-down. 

#Master Code 

 04 

 Code-Free period <0-9> 

 Time Start <HHmm> 

 Time End <HHmm> 

 Week Pattern 

••

 

#Master Code 

 04 

 0 

 0900 

 1630 

 1111100 

••

 

Result:

 The lock will be in Code-Free from 09:00 to 16:30 on Monday to Friday 

Help:

 The week pattern uses a sequence of 7 numbers (MTWTFSS) that enable (1) or disable (0) Code-Free on a particular 

day. 

Suspend or Restore Code-Free Mode 

Suspends or restores Code-Free Mode for specific or all Code-Free Mode periods.

 

Suspend specific Code-Free period:

 

#Master Code 

 05 

 1 

 Code-Free period <0-9> 

••

 

#12345678 

 05 

 1 

 0 

••

 

Result:

 Suspends Code-Free period 0 

Restore specific Code-Free period:

 

#Master Code 

 05 

 2 

 Code-Free period <0-9> 

••

 

#12345678 

 05 

 2 

 0 

••

 

Suspend all Code-Free periods:

 

#Master Code 

 05 

 3 

••

 

#12345678 

 05 

 3 

••

 

Result:

 Suspends all Code-Free periods 

Restore all Code-Free periods:

 

#Master Code 

 05 

 4 

••

 

#12345678 

 05 

 4 

••

 

Result:

 Restores all Code-Free periods 

Change the Re-lock Delay 

Change the time (in seconds) for the lock to remain unlocked after successful unlocking (i.e. correct code, card or 
phone). The default re-lock delay is 5 seconds.

 

Note:

 The delay range is from 2 seconds to 30 seconds. 

#Master Code 

 06 

 Time <02-30> 

••

 

#12345678 

 06 

 10 

••

 

Result:

 The lock will remain open for 10 seconds after successful unlocking. 

Emergency Open Cancellation 

By closing the normally open REM 2 contact, the lock will open for 30 minutes. The Emergency Open Cancellation reverts 
the lock to normal operation after the REM 2 input has been triggered.

 

Summary of Contents for CL5510



























Reviews: