Code Soft PL-330D, User Manual

Page: 72 / 101

CODESOFT PL-330 User's Manual
- 66 -
GS B Turn white/black reverse mode on/off
Format: ASCII: GS B n
Decimal: 29 66 n
Hex: 1D 42 n
Description:
When the last bit of n is 0, turn the white/black reverse mode off.
When the last bit of n is 1, turn the white/black reverse mode on.
GS H Enable/disable the printer to print HRI character
Format: ASCII: GS H n
Decimal: 29 72 n
Hex: 1D 48 n
Description:
n=0, 48: NO HRI printing. n=1, 49: above the barcode.
n=2, 50: above the barcode. n=3, 51: Both above and below.
GS L Set left margin
Format: ASCII: GS L nL nH
Decimal: 29 76 nL nH
Hex: 1D 4C nL nH
Description:
Set the distance between print position and left margin is (nL+nH*256)*(horizontal or vertical minimal unit);
nL, nH=0~255.
Horizontal or vertical minimal unit is specified by GS P command.
GS P Set horizontal or vertical minimal unit
Format: ASCII: GS P x y
Decimal: 29 80 x y
Hex: 1D 50 x y
Description:
Set the horizontal and vertical minimal unit to 1/x inch and 1/y inch.
When x or y=0, the default setting 1/203 inches is selected.
GS V Select cut mode and cut paper
Format: ASCII: GS V m (n)
Decimal: 29 86 m (n)
Hex: 1D 56 m (n)
Description:
(The command can only realize full cut or partial cut according to the cutter type.)
m=0, 48; No n parameter, Executes a full cut.
m=1, 49; No n parameter, Executes a partial cut (with one point left in the middle).
m=6, n=0~255; Feed paper to n*(vertical minimal unit) and executes a full cut.
m=66, n=0~255; Feed paper to n*(vertical minimal unit) and executes a partial cut.
GS W Set print area width
Format: ASCII: GS W nL nH
Decimal: 29 87 nL nH
Hex: 1D 57 nL nH
Description:
Set the print area width to (nL+nH*256)* (horizontal or vertical minimal unit),