Code Soft PL-330D, User Manual

Page: 65 / 101

CODESOFT PL-330 User's Manual
- 59 -
1
8-dot
double-density
8 68 DPI 203 DPI 576
32
24-dot
single-density
24 203 DPI 101 DPI 288
33
24-dot
double-density
24 203 DPI 203 DPI 576
ESC - Turn underline mode on/off
Format: ASCII: ESC - n
Decimal: 27 45 n
Hex: 1B 2D n
Description:
n=0, 48 Turn underline mode off
n=1, 49 Single underline mode on
n=2, 50 Double underline mode on
ESC 2 Set the line spacing to 3.75mm
Format: ASCII: ESC 2
Decimal: 27 50
Hex: 1B 32
Description:
Set the line spacing to 3.75mm.
ESC 3 Set the user-defined line spacing
Format: ASCII: ESC 3 n
Decimal: 27 51 n
Hex: 1B 33 n
Description:
Set the line spacing to n*, n=0~255.
The line spacing of CODESOFT PL-330 is the n* horizontal minimal unit.
The vertical or horizontal minimal unit is specified by GS P Command.
ESC = Select peripheral device
Format: ASCII: ESC = n
Decimal: 27 61 n
Hex: 1B 3D n
Description:
The Last bit of n is 0, printer disable.
The Last bit of n is 1, printer enable.
ESC ? Cancel user-defined character
Format: ASCII: ESC ? n
Decimal: 27 63 n
Hex: 1B 3F n
Description:
Cancel the character specified by n. n=32~126.