![Code Alarm PROFESSIONAL SERIES Installation Manual Download Page 21](http://html.mh-extra.com/html/code-alarm/professional-series/professional-series_installation-manual_2633718021.webp)
21
2020 Voxx Electronics Corporation. All rights reserved.
3 - Ignition Locks:
Control of door locks when the ignition is cycled ON or OFF.
OFF - Door locks not activated by ignition.
Lock / Unlock - Doors lock when ignition is turned on and unlock when
ignition is turned off.
Lock Only - Doors lock when ignition is turned on.
Unlock Only - Doors unlock when ignition is turned off.
4 - Trunk Output Timing:
Control of the RED/WHITE trunk release output wire when
trunk release is activated from the transmitter.
1 Sec. - 1 second pulse output.
10 Sec. - Continuous output for 10 seconds.
20 Sec. - Continuous output for 20 seconds.
Latched until IGN ON - Continuous output until the vehicle’s ignition is turned
ON.
Latched ON until Button Press - Continuous output until the activation button is
pressed again.
5 - Horn Output Timing:
Control the minimum horn pulse time in milliseconds, some
vehicle will require a longer pulse to activate the factory horn.
16mS
10mS
30mS
40mS
50mS
6 - Real Panic:
Controls the panic out when triggered from the transmitter.
ON - Randomized horn honks when panic is triggered.
OFF - Standard pattern horn honks when panic is triggered.
7 - AUX 1 - Violet/Black Output:
Controls the VIOLET/BLACK AUX 1 output
activation type and timing.
Push and Hold - Output is continuously active until transmitter button is
released.
Latched - Output stays active until button is pressed again.
Latched until IGN ON - Output stays active until the ignition is turned on.
Dome Light Output - Output is used for illuminated entry and is not controlled
by the AUX 1 function of the transmitter.