manualshive.com logo in svg

Code Alarm PROFESSIONAL SERIES, Installation Manual

Share
Download
Code Alarm PROFESSIONAL SERIES Installation Manual Download Page 11

11

2020 Voxx Electronics Corporation. All rights reserved.

 

Door Locks

  1 

BROWN/BLACK 

 

UNLOCK SWITCH ( 87A )

  2 

BLUE/BLACK   

 

UNLOCK MOTOR ( 30 )

  3 

VIOLET/BLACK 

 

UNLOCK POLARITY ( 87 )

  4 

WHITE/BLACK  

 

LOCK SWITCH ( 87A )

  5 

GREEN/BLACK 

 

LOCK MOTOR ( 30 )

  6 

VIOLET   

 

 

LOCK POLARITY ( 87 )

  The door lock / unlock outputs are designed to control several different types of 

systems which may require additional parts.

3 Wire Ground Switched Door Locks:

  Connect the GREEN/BLACK wire to the wire that provides a ground signal from the 

factory door lock switch to the factory door lock control relay.

  Connect the BLUE/BLACK wire to the wire that provides a ground signal from the 

factory door unlock switch to the factory door lock control relay.

  Connect the VIOLET and the VIOLET/BLACK wires to a solid chassis ground point. 

The WHITE/BLACK and BROWN/BLACK wires are not required for this type of door 

lock/unlock system.

3 Wire Positive Switched Door Locks:

  Connect the GREEN/BLACK wire to the wire that provides a +12 volt signal from the 

factory door lock switch to the factory door lock control relay.

  Connect the BLUE/BLACK wire to the wire that provides a +12 volt signal from the 

factory door unlock switch to the factory door lock control relay.

  Connect the VIOLET and the VIOLET/BLACK wires to a +12 volt battery source. The 

WHITE/BLACK and BROWN/BLACK wires are not required for this type of door lock/

unlock system.

Summary of Contents for PROFESSIONAL SERIES

























Reviews:

No comments

Brands by name

Popular brands

Load more brands