4
2017 Voxx Electronics Corporation. All rights reserved.
Using the “Quick-stop” Feature
With vehicle running, if you wish to make a quick stop and leave the vehicle running,
once you arrive at your destination:
a) place the gear selector in Park,
b) set the parking brake,
c) with your foot off the brake, press the transmitter button two times
in succession.
The vehicle will now be under control of the remote start system. Turn your
ignition switch off, WITHOUT, stepping on the brake, and exit the vehicle. Lock
the doors with the key to insure security.
Timed Start Program:
The Remote Start unit has the ability to start the vehicle automatically at timed
intervals. This feature is useful in extremely cold climates where starting the engine
is the only means to keep the battery charged and fluids warm. The operator has the
option to have the unit start every 2 or 4 hours for a maximum of 48 hours. Factory
preset is to start at 4 hour intervals. To select 2 or 4 hour automatic start timer:
1. Start By Holding the Push Button Switch found on the windshield mount
receiver on.
2. While Holding the Push Button Switch Turn The Ignition Switch On Then
Off
3a) Within 10 seconds of turning the ignition switch off, Release and then
Push On and release the Push Button Switch 2 times holding it on the
second time until the siren and or lights flash and chirp 2 times indicating
that the 2 Hour Start Interval has successfully been set.
- OR -
3b) Within 10 seconds of turning the ignition switch off, (Step 2) Release
and then Push On and release the Push Button Switch 4 times holding
it on the fourth time until the siren and or lights flash and chirp 4 times
indicating that the 4 Hour Start Interval has successfully been set.
NOTE: Once selected, 2 or 4, this timer interval will remain in memory until it is
manually changed. To change, the above sequence will have to be followed.
