7
1. 5 PIN MAIN POWER HARNESS, CONTINUED
Battery Power (RED)
Note: Remove the 3 Amp fuse until all connections are made.
Locate 1 of the vehicle’s constant 12 Volt battery wires at the ignition switch.
Verification: This wire will register voltage in all positions of the ignition switch.
Connect the RED wire to the constant 12 Volt battery wire
2. 9 PIN INPUT/OUTPUT HARNESS
Instant Trigger Input (BLUE/WHITE)
This wire is a GROUND input for an external sensor or secondary pin switch.
Verification: This wire when connected will trigger the security system
Negative Door Input (GREEN)
Locate the vehicle’s dome light or door pin switch wire.
Verification: This wire will register ground (NEG) when the door is opened and the interior light is on. This
wire will register positive voltage when the door is closed and the interior light is off.
Connect the GREEN wire to the vehicle’s negative door input wire(s).
NOTE: Certain vehicles may require multiple connections. Refer to vehicle application guide
Ground When Armed Output (-) 500mA (ORANGE)
This wire will show Ground when the system is Armed. This wire is used for starter kill relay or controlling
optional window modules and additional sensors.
Positive Door Input (PURPLE)
Locate the vehicle’s dome light or door pin switch wire.
Verification: This wire will register positive voltage (POS) when the door is opened and the interior light is
on. This wire will register ground or "0" Volts when the door is closed and the interior light is off.
Connect the PURPLE wire to the vehicle’s positive door input wire(s).
NOTE: Certain vehicles may require multiple connections. Refer to vehicle application guide
30
87
87a
86
85
Starter Wire Motor Side
Fused +12 Volt
Ignition/Crank
Starter Wire Key Side
STARTER WIRE - CUT
X
To ORANGE
Ground When Armed
