8
2. 9 PIN INPUT/OUTPUT HARNESS, CONTINUED
12 volts Ignition Input (YELLOW)
Locate the vehicle’s ignition wire at the ignition switch.
Verification: This wire registers voltage when the key is turned to the ON (or RUN) position. The voltage
does not drop out when the key is turned to the START (or CRANK) position.
Connect the YELLOW wire to the vehicle’s Ignition wire.
This wire is also used for Ignition 1 Output.
Trunk Release Output (-) 500mA (RED/WHITE)
Locate the vehicle’s trunk release wire at the trunk release switch.
Verification: This wire will register either positive voltage or ground when the trunk release is activated.
Horn Output (-) (BROWN/BLACK)
NOTE: This output is programmable to the following options: Dome Light Supervision, Horn (default), Factory
Security Disarm, Ground During Crank.
Locate the vehicle’s horn wire.
Verification: This wire will register positive or negative voltage when the vehicle's horn is activated.
AUX 1 (-) (VIOLET/BLACK)
This wire provides a 500mA negative output capable of driving relays. For control of optional accessories
(i.e. Power Window/Sunroof, etc.).
To Activate press and hold LOCK & TRUNK. Please refer to the selectable options for timing.
Selectable timing: Push & Hold / Press to Latch ON Press to Latch OFF / Press to latch ON and reset with
ignition / Programmable 1 second to 2 minutes, (see AUX 1 optional timer programming).
FACTORY DISARM (-) (Lt. GREEN/BLACK)
This wire provides a (-) 500mA output with the press of UNLOCK, when the remote start feature is activated
and when the trunk feature is activated.
NOTE: This output is programmable to the following options: 2nd Door Unlock, Factory Disarm (default).
