Emergency Override Procedure
If your transmitter is lost or disabled, it will be necessary use the emergency override button to
turn the security system off. There are two types of emergency override procedures. Check
with your installing dealer to find out what has been activated on your system.
Standard Emergency Override Procedure
1.
Enter the vehicle (the security system will trigger.
2.
Turn the ignition key to the ON position.
3.
Press and release the emergency override button (The security system will turn off).
Note: If the automatic arming feature is enabled on your system. The security system will re-arm
the next time the ignition key is turned off and the vehicle’s doors are closed.
Coded Override Procedure
The system has an optional override mode that allows you to program a 2-digit personal code
using the emergency override button offering a higher level of security. This feature must be
enabled by your installing dealer, the default override code is 11.
1.
Enter the vehicle (the security system will trigger).
2.
Turn the ignition switch to the ON position.
3.
Within 5 seconds press the emergency override button the number of times
corresponding to the first digit of your personal code (Default digit is 1).
4.
Within 5 seconds turn the ignition key OFF, then ON.
5.
Within 5 seconds press the emergency override button the number of times
corresponding to the second digit of your personal code (Default digit is 1).
6.
If entered correctly the security system will turn off.
7.
Turn the ignition key to the OFF position.
Programming Your Personal Override Code
1.
Make the security system is disarmed.
2.
Turn the ignition key to the ON position.
3.
Within 10 seconds press and release the override button 3 times.
4.
Within 10 seconds turn the ignition key OFF then ON 3 times (The horn will honk
and the lights will flash 1 time).
5.
Within 10 seconds press and release the override button the number of times
corresponding with the first digit of your personal code (1-9).
6.
Within 10 seconds turn the ignition key OFF then ON.
7.
Within 10 seconds press and release the override button the number of times
corresponding with the second digit of you personal code (1-9).
8.
You will notice the LED flash a number of times corresponding with the code you
entered.
Note: If 15 seconds of inactivity pass the system will abort programming.
Your Emergency Override Button is Located_____________________
7
