Using Your Remote Control, continued
Using the Transmitter Flashlight Feature
The (1) 6 button (non-confirming) remote control included with your system has a flashlight bulb built into
the top of the remote control. Pressing and holding the LIGHT icon button on the remote control will
activate the flashlight until the button is released.
Using Valet Mode
To engage valet mode:
1.
Turn the ignition key to the ON position.
2.
Press and release the emergency override button.
3.
The blue dashboard mounted LED will light solid indicating that the system is in
valet mode.
When valet mode is activated the dash mounted status LED will light solid, and all security functions will
be disabled.
To disengage valet Mode:
1.
Turn the ignition key to the ON position.
2.
Press and release the emergency override button.
3.
The blue dashboard mounted LED will turn off indicating that the system has
exited valet mode.
When the valet mode has been deactivated the dash mounted status LED will turn off and all security
functions will be enabled the next time the system is armed.
Additional LED Remote Control Functions
Check Vehicle Status
Press the LOCK icon button, TRUNK icon button and OPT button simultaneously for 1 second. The LED
remote control will display the system’s current status.
LED Remote Control Vibrate or Tones
Press an release the “F” button and the UNLOCK icon button on the LED remote control simultaneously
one time to toggle between beep tones and vibrate mode. The LED remote control will either beep or
vibrate to indicate which mode is selected.
2
5
