This siren system is CA T13 compliant when configured properly. Limitation of siren tones available to the end user
are password protected to insure CA T13 compliance.
(Lighting Control keys are found on the light grey pad. Auditory Control keys are found on the blue pad in the center of the Controller.
Control keys in (parenthesis) are when “Alt” is pressed before button is selected)
Primary light controls (play recorded message)
Take Down lights (recorded message repeat)
Hi Lo siren #2 (flash rate program)
Standard Wail and Yelp siren tones (back light program)
Enable quick selection of lights and siren
Secondary
lights
Bargraph
display
left alley
(vol up prgrm)
program
select
Clear
all
selections
and record stop
sign light , (message record)
Manual siren key (siren volume select prgm)
right
alley
(vol down prgrm)
Radio
rebroadcast
-
PA
(program
function
key)
IMPORTANT WARNINGS TO USERS OF SIRENS: “Wail” and “Yelp” tones are in some cases (such
as the state of California) the only recognized siren tones for calling for the right of way. Ancillary
tones such as “Air Horn”, “Hi-Lo”, “Hyper Yelp”, and “Hyper Lo” in some cases do not provide as high
a sound pressure level. It is recommended that these tones be used in a secondary mode to alert
motorists to the presence of multiple emergency vehicles or to the momentary shift from the primary
tone as an indication of the imminent presence of any emergency vehicle.
Figure 2 - Controller Functions
T56095 Rev. A
Page 7 of 22
