PROGRAMMING STEP #4:
SELECTION OF DIFFERENT 2nd SIREN TONES:
the following keys will be illuminated:
SIREN 2
(will be illuminated )
Indicating Step #4 in
Yellow bargraph will
programming
mode.
light
according
to
its
current
program
tone
selected.
(Use
Up
&
Down
keys
to
select
one
of
the
choices.
Bar
graph
will
indicate
choice
of
selection)
1.)
For all Euro Tone Programming, refererence Chart 1 on Page 13.
2.)
A.) Pressing the Secondary (SEC) button once will light up the button. This is enabling that
“multiplier”. If the Secondary (SEC) button is pressed again, the button backlighting will
turn OFF and disable that “multiplier”.
B.) Pressing the Repeat (▲) button once will light up the button. This is enabling that
“multiplier”. If the Repeat (▲) button is pressed again, the button backlighting will turn OFF
and disable that “multiplier”.
C.) Pressing Secondary (SEC) once and Repeat (▲) once will light up both buttons. This is
enabling that ”multiplier”. If both buttons are pressed again, their backlighting will turn off
and disable that “multiplier”.
D.) After the multiplier(s) is chosen, use the ◄ and ► to navigate the lights in the yellow
bargraph area of the control head to choose the tone that is desired. After tone selected,
pressing Alt will save the selection & continue to next step in programming.
ALT Will advance the programming mode to next step.
PROGRAMMING STEP #5:
1.)
SELECTION OF DIFFERENT MANUAL SIREN TONES:
the following keys will be illuminated:
MAN
(will be illuminated )
Indicating Step #5 in
Yellow bargraph will
programming
mode.
light
according
to
its
current
program
tone
selected.
(Use
Up
&
Down
keys
to
select
one
of
the
choices.
Bar
graph
will
indicate
choice
of
selection)
T56095 Rev. A
Page 16 of 22
