Coda LINUS10, User Manual, Page: 24 / 43

24
4.1 Screen user interface
Indication:
1. Channel mute / channel selection buttons
2. Rotary encoder knob selects, changes and enters parameters.
3. Press "ESC" escape button any time to deny
selection and/or go back to main operation page.
4. "STORE" snapshots (1) to (10).
5. "UP" skips operation pages up.
6. "DOWN" skips operation pages down.
7. LiNET LED will indicate, if LiNET signal input signal is selected:
- LED on
→
LiNET audio input (clock present)
- LED off
→
Analog audio input selected
- LED flashes constantly - - -
→
No LiNET audio input (clock missing)
- LED flashes with interval - o
→
Analog fallback enabled.
Analog audio input in use (clock present).
8. Channel selection buttons
9. Input/output signal and protection LEDs
10. Ethernet connection LED
11. Comparator LED for sensor controlled subs:
- LED on
→
Sensor loop is not closed
- LED off
→
Sensor loop is closed
4.1.1 Module number
Move the selection field with the encoder knob to the unit mode and
push to enter selection.
Turn encoder knob to select a number from (1) to (250) and press to
confirm.
4.1.2 Speaker selection
Move the selection field with the encoder knob to the desired
amplifier channel. Press encoder knob to enter speaker series
selection.
Series selection: ALL, Line Array, APS-Series, N-APS-Series, HOPS-
Series, Column Line Source, G-Series, D-Series, Subs, Monitors,
Discontinued.
Press encoder knob to enter speaker file selection and move selection
field to the next row. Press encoder knob to confirm.
4.1.3 Input signal routing
Move the selection field with the encoder knob to the desired
amplifier channel.
Select the input signal type and source (analog or digital):
- Input signal chart - analog inputs: A, B, C, D
- LINET (digital) inputs: 1, 2, 3, 4, 5, 6, 7, 8.
LINUS10 4. OPERATION
4. OPERATION
Load Speaker Channel=1
Series:
LineArr.
92 1WAY Single LineArr.
TiR PF-S> 1WAY #1
Speaker Series
P1:SNAPSHOT #01
TIR TIR
PF-S> PF-S>
1 2
Module
Number
3.
4.
5.
6.
1.
9. 7. 8.
2.
10.
11.
P1:SNAPSHOT #01
TIR TIR
PF-S> PF-S>
2 1 Signal Input
Load Speaker Channel=1
Series:LineArr.
LineArr. <92 1WAY Single>
TiR PF-S> 1WAY #1
Speaker Files
P1:SNAPSHOT #01
TIR TIR
PF-S> PF-S>
1 2
Speaker