22
3.4 Signal inputs
The LINUS10 amplifier offers two different input signal sources:
Analog
- in this mode the analog signals connected to the XLR input connectors will be used as input signal.
LiNET
- with the LiNET setting the input signals are taken from the LiNET digital audio network interface.
3.4.1 Analog input
XLR:
Pin 1 = Ground (lifted via 15 0 resistor to chassis/ earth)
Pin 2 = Hot (in polarity, "+")
Pin 3 = Cold (out of polarity, "- ")
3.4.2 LiNET AES/EBU input/output
The AES/EBU input and output connectors allow you to receive and send multichannel digital audio streams to other AES
/EBU-compatible devices. Please note that although the AES/EBU connectors use the same connector type than standard
Ethernet (RJ45), the physical transmission protocols are different. So any direct connection between the AES/EBU connec-
tors and standard Ethernet con nectors will not work.
LINUS10
3. INSTALLATION
LiNET AES/EBU RJ45 pin wiring
RJ45 pin
Colour
Channel (polarity)
1
orange-white
1/2 (+)
2
orange
1/2 (-)
3
green-white
3/4 (+)
4
blue
5/6(+)
5
blue-white
5/6 (-)
6
green
3/4 (-)
7
brown-white
7/8 (+)
8
brown
7/8 (-)
72&+$11(/$
72&+$11(/%