4.2 Indicators
4.2.1 Limit LEDs (Channel A / Channel B)
This LED indicates an overloading of the corresponding amplifier channel.
4.2.2 Input Signal LEDs (Channel A / Channel B)
4.2.3 Sensor LED
-
4 OPERA
TION
1.
2.
3.
4.
5.
6.
7.
8.
9.
1. Channel mute buttons
2. Rotary encoder knob. Selects, changes and
enter parameters
3. “ESC“ escape button. Press it any time to
deny selection and / or go back to main
operation page
4. “Store“ user preset setting under position 1.
to 5.
5. “Up“ skips operation pages up.
6. “Down“ skips operation pages down.
7. LiNET LED Indicates if digital signal is
selected - LED on
→
Digital audio input
- LED off
→
Analog audio input
8. Channel selection buttons
9. Input - or Output signal LED‘s
This orange LED is off when the sensor feedback loop is closed. Should the
choosen preset demand for a sensor feedback and the cable is not
connected this LED will be illuminated as a warning signal to check your
cables.
The green Signal LED is illuminated when the input signal level is -45dBU
or -60dBFS and are unaffected by the DSP output settings.
Note that these LED‘s are driven only by the input signal and will therefore
also be active if all output channels are muted.
CODA AUDIO
LINUS 10
USER MANUAL v1.0
CODA AUDIO LINUS10
P. 27