
3.4 Signal inputs
The
LINUS10
amplifier offers two different input signal sources:
Analog
In this mode the analog signals connected to the XLR input connectors
will be used as input signal.
LINET
With the L INET setting the input signals are taken from the LINET Digital
Audio Network Interface.
3.4.1 Analog Input
XLR:
Pin 1 = Ground (lifted via 15
Ù
resistor to chassis / earth)
Pin 2 = Hot (in-phase, "+")
Pin 3 = Cold (out of phase, "- ")
We suggest to always use symmetrically (balanced) shielded cable to con-
nect the amplifier.
The
LINUS10
amplifier has a 32 dB voltage gain.
The table shows input sensitivity per channel for a given gain and load.
Model
rated output power
32 dB
LINUS10
5300 W @ 2
Ù
4900 W @ 4
Ù
2300 W @ 8
Ù
2,54 V
3,19 V
3,40 V
3.4.2
LINET
Input / Output
The L
input and output connectors allow you to receive and send
multichannel digital audio streams to other LINET-compatible devices
(like other
LINUS10
amplifiers for example). Please note that altough the
L
connectors use the same connector type than standard Ethernet
(RJ-45), the physical transmission protocols are different. So any direct
connection between the L
connectors and standard Ethernet con-
nectors will not work.
3.5 Remote control inputs (Ethernet /
LINET
)
The Ethernet Link network connector allows you to access the
LINUS10
from a host computer for remote control, firmware update and download-
ing DSP presets. Please note that for setting up proper network connec -
tion you need to use the
CODA AUDIO LiNUS-Live
software.
3 INST
ALLA
TION
INET
INET
INET
LINET
Rj45 Pin Wiring
Pair
3
Green
CH
3+4
Pair
2
Orange
CH
1+2
Pair
1
Blue
CH
5+6
Pair
4
Brown
CH
7+8
1
2
3
4
5
6
7
8
T568B
RJ45-Pin
Color
Linet
Channel
(Polarity)
1
Orange-White
1/2 (+)
2
Orange
1/2 (-)
3
Green-White
3/4 (+)
4
Blue
5/6 (+)
5
Blue-White
5/6 (-)
6
Green
3/4 (-)
7
Brown-White
7/8 (+)
8
Brown
7/8 (-)
TO CHANNEL B
TO CHANNEL A
2
3
1
2
3
1
1
3
2
1
3
2
LINK B
LINK A
INPUT
CHANNEL B
INPUT
CHANNEL A
TO CHASSIS/EARTH
15
Ù
CODA AUDIO
LINUS 10
USER MANUAL v1.0
CODA AUDIO LINUS10
P. 17