User Manual Coda
®
Positive Pressure Unit V2 – October 18, 2017
Page 9
M-CODA-PP
77.5"
Figure 4
Step 3:
Preparing the wall for cutting the hole required for the positive pressure unit. Measure
up from the floor and put a mark at 77.5 inches (196.8 cm). Place the bottom inside edge of the
template provided at the mark you just put on the wall. Using painters tape or an appropriate tape
secure the template to the wall. Using a pencil trace the inside of the template. This will be your cut
mark. Remove the template. (see Figure 4)
Summary of Contents for CAPP-115
Page 1: ...User Manual 115V 230V Coda...