User Manual Coda
®
Positive Pressure Unit V2 – October 18, 2017
Page 8
M-CODA-PP
Initial Inspection
1.
Remove the Coda
®
Positive Pressure Unit from its packaging. Remove the manuals and excess
packaging material. Save all packaging material in case of return.
2.
Check the unit for any damage. Report any damage to
Customer Service
immediately.
3.
You will need to install a Coda
®
Positive Pressure Unit Annual Filter Kit.
Installation
Step 1:
Secure metal top to the Coda
®
Positive
Pressure Unit using the screws provided. The
screw holes have been pre-drilled for easy
installation. (see Figure 2)
Step 2:
Before doing any measuring or
cutting place the Coda
®
Positive Pressure Unit
approximately where it is to be installed. Visually
make sure it has enough clearance all around
the unit and also make sure there is an electrical
outlet close by. (see Figure 3)
Figure 3
Figure 2
Installation and Care
Summary of Contents for CAPP-115
Page 1: ...User Manual 115V 230V Coda...