EN
G
LI
S
H
5
Entanglement hazards
a)
Loose-fitting clothing, jewellery, necklaces or hair which becomes entangled
with the tool could result in strangulation, constriction or crushing.
b)
Gloves can become entangled in the rotating drive, resulting in severed or
broken fingers.
c)
Rubber-coated or steel-reinforced gloves can easily become caught in
rotating sockets or extension bars.
d)
Do not wear loose-fitting gloves or gloves with cut or frayed fingers.
e)
Never hold onto the drive anvil, socket or extension bar.
f)
Keep hands away from rotating drive anvils.
Connection to the air supply system
a)
This tool must only be connected to a clean, filtered and dry air supply
which provides an air pressure at the tool of 6.3 bar (90 psi). Warning: Too
high a pressure will reduce the lifespan of the tool and could cause serious
personal injuries.
b)
Connect the tool to the air supply using a hose designed for high pressure air.
c)
Fit a quick-connect coupling in the air hose and a regular inlet nipple onto
the impact wrench. Do not attach a quick-connect coupling to the impact
wrench itself, as this would retain pressure in the tool even when the air hose
has been disconnected.
d)
In order for the tool to work at its full capacity, the air compressor must
provide the tool with at least the tool’s rated air consumption.
e)
Only use air hoses of the recommended dimension and length. Do not
connect the tool to the air compressor without incorporating an easy to
reach and operate air cut-off valve.
f)
Make sure that any water which has condensed in the tank of the air
compressor or the air hoses is emptied out regularly to prevent water being
delivered into the tool.
Water in the system could freeze in the hose or cause
the tool to rust.
Explanation of symbols
Read the instruction manual before operating the tool.
Always wear ear protection.
Always wear eye protection.
