EN
G
LI
S
H
6
Buttons and functions
1. Attachment for socket
2. Power switch
Operating instructions
Note:
When tightening wheel nuts/bolts, a torque bar with the correct torque setting
should be inserted between the impact wrench and the impact socket, otherwise
the nut/bolt might be overtightened and the wheel could be damaged.
Please take the following into consideration:
• Park the vehicle on a firm and stable surface.
• Pull on the handbrake.
• Use a floor jack which can support the weight of the vehicle by a good margin.
• Support the vehicle on axle stands if you need to go under the vehicle for any reason.
• Never place any body part under a vehicle that is only being supported by floor jacks.
• Some vehicles may have different threads on the wheel nuts on the right- and
left-hand sides of the vehicle respectively. Check this before loosening the nuts in
order to avoid accidentally tightening them.
1
2
1. Use a socket which exactly fits the nut/bolt
you wish to loosen and push it firmly into
the impact wrench’s attachment point.
2. Push the socket fully onto the nut/bolt
you wish to loosen/tighten.
3. Hold the impact wrench firmly in both
hands.
4. The impact wrench drive is reversible.
-
Press the lower part of the power switch in order to
rotate clockwise (tighten the nut).
-
Press the upper part of the power switch in order to
rotate anticlockwise (loosen the nut).
