Wireless Camera with Solar Panel
15
1300 663 907
After Sales Support
www.cocoonproducts.com.au
Model number:
HE200073-S
10/2021
The solar panel requires full, direct sunlight to charge your camera. Grey skies, rainy days,
and other inclement weather conditions may hinder the ability of the solar panel to generate
power.
• For best results, the solar panel should be tilted towards the sun. The optimum angle varies
throughout the year, depending on the seasons and your location.
• Preferably, mount the solar panel somewhere that receives plenty of sunlight, between
10am and 3pm, to fully sustain your camera’s power needs all year round. Avoid placing in
a shady area. Shading from trees and buildings will substantially reduce the output of the
solar panel.
• The solar panel is designed to maintain the camera’s battery charge level based upon
the amount of sunlight received daily. It is not intended to power a flat camera or to fully
charge a camera from a low battery state. We recommend fully charging your camera via
your regular USB charger before attaching to the solar panel.
• Keep the solar panel surface clear of leaves and debris for optimum performance.
Mounting the solar panel
1.
Attach the mounting bracket to a solid surface with the supplied screws. Make sure to
allow enough charging cable to reach your camera from the mounting location of the solar
panel.
NOTE:
If mounting to a wooden surface, screw the mounting bracket directly to the surface. If mounting
to a masonry surface (bricks, concrete, or stucco), drill three holes using a 8mm(1/8”) drill bit and insert
the supplied wall plugs into holes. Then secure the mounting bracket to the surface with supplied screws
2.
Attach the solar panel to the mounting bracket. Align the solar panel with the threaded
screw on the swivel head mount, and then screw in the solar panel until it is secured
tightly.
3.
The solar panel produces power only when it is exposed to sunlight. To generate the most
power and achieve best charging performance, tilt the solar panel towards the sun, away
from cover and shade.
Connect the solar panel to your Smart Wireless Camera
1.
Insert the micro usb cable into the silicone waterproof cover.
2.
Put the Smart Wireless Camera into the silicone waterproof cover and connect the micro
usb cable into the charging port on the base of the camera.
NOTE:
•
If the solar panel is used, the included silicone cover must be used on the camera at all times
•
The camera can be used without the included solar panel, however charging must be done via USB
Solar Panel Installation
