To change the current program:
1.
If the processor is turned off, turn it on.
2.
Press the lower button until the program changes to the one
you want.
Each successive button press changes the program to the next one
(e.g. to change from program 1 to program 2, press once). The program
you select operates until you change it. When you turn your processor
off and on again, it will return to the program and settings you were
using before you switched it off.
Using the telecoil
The telecoil is used to receive sound signals from a telephone,
roomloop, neckloop, etc. It can also receive sound signals from an
amplifier, TV or Hi-Fi through an induction loop. The telecoil is a feature
that needs to be enabled by your clinician.
The telecoil is always turned off by default when you turn on your
processor. To turn on the telecoil, press the upper button. A single long
flash of green confirms that the telecoil is turned on.
To turn off the telecoil while using the processor, press the upper
button again. A single long flash of orange confirms that the telecoil
is turned off.
When an audio accessory is connected to your processor, you will not
receive any sound from the telecoil. To move back to using the telecoil,
remove the audio accessory from the processor. Turn off the telecoil
when not in use, as it reduces the microphone volume.
54 - CP810 Sound Processor User Guide
© Cochlear Limited 2015
Using your processor
