Changing the coil
Regularly check to see if there are any breaks in the coil cable,
particularly if you are experiencing intermittent sound. If there are
breaks you will need a new coil. If there are no visible breaks it is still
a good idea to test the coil by using a new one.
If you plug the coil cable into the Processing Unit when your
processor is turned on, your processor may turn off. If this occurs,
hold down the Select button to turn your processor back on, that is,
until you either hear sound or the display shows.
A secure fi t using the Mic Lock
™
When using the standard earhook instead of the Acoustic
Component, a Mic Lock
™
can be used to hold the Processing Unit
in place behind the ear. The Mic Lock cannot be used while the
Acoustic Component is connected to your processor.
The tube Mic Lock can be used on the BTE Controller, the Mini BTE
Controller and the Bodyworn Cable. The stirrup Mic Lock is for use
with the Bodyworn Cable only.
To fi t the Mic Lock:
For the tube Mic Lock, thread the earhook and Processing Unit
1.
through the Mic Lock tube and move it down the unit until it fi ts
fi rmly.
For the BTE or Mini BTE Controller, position the Mic Lock between
the buttons, so the transparent band covers the display. Alternatively,
clip the stirrup Mic Lock into the two holes towards the base of the
Bodyworn Controller shoe.
© Cochlear Limited 2009
Freedom Hybrid User Guide - 15
We
a
r
in
g
182630 Hybrid SP User Guide ISS2 D02 RJD.indd 15
182630 Hybrid SP User Guide ISS2 D02 RJD.indd 15
3/08/2009 12:42:37 PM
3/08/2009 12:42:37 PM