To attach the Acoustic Component or earhook to the Processing
Unit, simply push the plug on the Processing Unit into the socket of
the earhook.
To avoid damaging the cable, grip the Acoustic Component by
the earhook when pushing it in, or pulling it out. Do not hold it
by the cable.
Adjusting the coil and magnet
Make sure the coil is positioned correctly against the implant by
placing it where the magnet “pull” feels the strongest.
You can change how close the magnet sits to your head by changing
its depth in the coil, effectively changing its “strength”. You can also
replace the magnet with a stronger or weaker one if changing the
depth of the magnet in the coil is not suffi cient.
Changing magnet depth
To adjust how tight the coil sits against your skin, try adjusting how
closely positioned the magnet is to your head by changing its depth in
the coil before changing the magnet itself.
Adjusting the magnet
To adjust the magnet position (depth in the coil):
Insert a thin coin or screwdriver into the magnet slot on the
1.
topside of the coil.
Twist in a clockwise direction from above to increase magnet
2.
strength, or twist in an anticlockwise direction from above to
reduce magnet strength.
© Cochlear Limited 2009
Freedom Hybrid User Guide - 13
We
a
r
in
g
182630 Hybrid SP User Guide ISS2 D02 RJD.indd 13
182630 Hybrid SP User Guide ISS2 D02 RJD.indd 13
3/08/2009 12:42:35 PM
3/08/2009 12:42:35 PM