Cochlear CP1110 User Manual Download Page 14

Page: 14 / 120

Introduction

Nucleus 8 Sound Processor User Guide

Contraindications

The Nucleus 8 Sound Processor is not indicated for use with

hearing implants other than those listed in Indications.
The accessories listed in Indications are not indicated for use

with an incompatible sound processor.

Cochlear Nucleus 8 Slimline Coil

The Cochlear Nucleus 8 Slimline Coil is not indicated for use with

hearing implants or processing units other than those listed in

Indications.

The Cochlear Nucleus 8 Slimline Coil is not indicated for use with

Cochlear Magnet strength 5(I).

Cochlear Nucleus 8 Slimline Coil (5(I))

The Cochlear Nucleus 8 Slimline Coil (5(I)) is not indicated for

use with hearing implants or processing units other than those

listed in Indications.

The Cochlear Nucleus 8 Slimline Coil (5(I)) is not indicated for

use with Cochlear Magnet strength ½ to 6 and ½(I) to 4(I) and

Cochlear Magnet Reverse Polarity strength ½ to 6.

Summary of Contents for CP1110

























































































































Search results

Summary of Contents for CP1110

Reviews:

Related manuals for CP1110

Brands by name

Popular brands

Cochlear CP1110, User Manual

Search results

Summary of Contents for CP1110

Reviews:

Related manuals for CP1110

Brands by name

Popular brands