EN
Seat Reversal
G. Rear wheel with lock
H. Front wheels with suspension
Unfold the Baby Stroller
Install the Front Wheels
Install the Bumper Rail or Handrail
The position of the seat can be adjusted with the help of buttons present on the
stroller. Buckle the belt at the back, as shown in Fig. 6a Buckle the belt on both
sides of the carry cot as shown in Fig. 6b Press the side buttons and adjust the
carry cot as shown in Fig. 6c
The carry cot comes pre-assembled. Plug it on to the adapters as shown in Fig
5a and 5b.
As shown in Fig. 2, attach each wheel to the front wheel axle till a "click" sound
is heard.
As shown in Fig. 3, insert the rear wheels into the rear wheel axle till a "click"
sound is heard and ensure the rear wheels are locked and cannot be pulled out.
Install the Rear wheel
Press the buttons on both sides of the handle to adjust handle height as shown
in Fig. 8a and 8b.
- Unfold the folding hook, pull the handlebar and gradually push to open the
stroller until a "click" sound is heard as shown in Fig. 1 b and 1c
- Take the stroller out of the package as shown in Fig. 1 a
Seat Adjustment
I. Swivel wheels with locking function
As shown in Fig. 4, insert the rail into the body of unit and press down till
a"click"sound is heard.
Carry Cot Installation
Assembly Instructions:
To reverse the seat just disconnect the carry cot from the frame by pressing
down the two side buttons, change its direction and fix it onto the connectors
again as shown in Fig. 7a, 7b, 7c and 7d.
Handle Height Adjustment
A. Canopy
C. Reversible & removable carry cot
B. Adjustable handle
D. 5 Point safety harness
E. Reclining Positions
F. Storage basket
