Coccolle Nerio, User Manual

Page: 35 / 43

- Press the FIX release button, pull it back to release the FIX.
- Grasp the seat body to check the seat if it is fastened tightly or shakes.
Warning: Please do not only use FIX to install the seat for Group II/III. It must be
installed with Vehicle safety belts. If release the FIX unsuccessfully, please
repeat the above steps.
- Take the crotch pad off, place the buckle on the hole
Car seat Preservation (Fig. 24)
Don't use solvents, chemical detergents or lubricants on the product.
- Hold up the bottom of headrest cover
- Loose the harness strap and pull shoulder strap out off the strap slide
- Push the car seat by your knees
Release the FIX (Fig. 21)
- Press the hook lock, take it off.
Use the FIX guide sleeve (Fig. 22)
3. Push the FIX Interface into the anchorages through the FIX guide sleeve until
heard an audible sound“click”. (a green mark will turn up on the button,Make
sure that is seamless between the seat body and vehicle seat)
2. Push the FIX guide sleeve directly into the anchorages until it is fixed.
1. find the FIX anchorages on vehicle seat
- please store all parts away safely for future use
Notice: Make sure that FIX Routing Cover is installed to FIX Interface when it is
not in use.
Remove / Install car seat cover (Fig. 23)
- Press the Top tether buckle button to release the straps
- Remove the headrest cover
- Release the 5-point buckle
- Remove the other covers
- Place the car seat body cover
- Pass shoulder straps through harness slots
- Then connect the end of strap with harness slide
- Place the headrest cover, please use the cushion if your child's body weight
less than 13kg
Warning: Do not use the car seat without the cover
The cover can be removed and washed with a mild detergent using the washing
machine's cycle for delicate items 30°C. Please observe the instructions on the
washing label of the cover. The colors of the cover may fade if wash ed at more
th an 30°C. Do not spin, and never tumble dry in an electric cloth es dryer (the
fabric may separate from the padding). The plastic parts can be cleaned using
soapy water. Do not use harsh cleaning agents (such as solvents). The harness
can be removed and washed in lukewarm soapy water. Never remove the
buckle tongues from the straps.
Warning: Do not use the child restraint without cover!
EN