- Find the red angle adjust handle under the seat
- position 1,2,3 for forward / position 4 for rearward
- Press the central adjuster button
tightness is comfortable to your kid
fit around your child.The harness straps are not twisted.
- Place the cover back on the car seat body
Adjust the Top tether strap (Fig. 15)
headrest cover
- lift the car seat body cover up on the both sides
Please adjust the seat to blue rearward position when rearward facing
installation. Only suitable angle can protect the child properly.
Adjust car seat angle (Fig. 16)
- Tighten: Pull the straps tight by the harness adjust strap, and make sure the
- Adjust the height of the headrest, Convert the fix plate 90°, pull it out off the
hole
- The headrest can slide up and down, release it when the height fit properly.
- Make sure that the harness straps fit properly over the shoulders of the child.
- Take off the hook lock, convert the longer or shorter strap
- Pull it to adjust the seat position
Adjust 5-point harness (Fig. 17)
Notice! please make sure that The harness straps are comfortable but firmly
- Release: Pull the harness straps as far as you can.Note! Do not pull the
shoulder pads.
- Press and pull the handle behind headrest.
- The correct belt height of the shoulder pads is attained when the strap
disappears into the shell slightly above the shoulder of the child
Remove 5-point harness (Fig. 19)
- Place the buckle on the hole
Adjust headrest height (Fig. 18)
- Open the harness buckle, pull up the headrest,then hold up the bottom of
- Press and pull the handle behind headrest.
- place the shoulder pads, straps and buckle tongues flat on the car seat body
underneath the cover
Rotate/Convert car seat direction (Fig. 20)
This car seat is 360° rotation.There are 4 directions.
Warning: Please make sure the seat is locked on the right direction position
Never use the seat without locked position.
1. Rearward Suitable for Group 0, can not be used for other stages
2. Forward: Suitable for Group I/II/III, can not be used for Group 0
3. 4. Lateral: Can only be used when the car is stopped,Can not be used when
traveling
- Pull the pivoted handle, rotate the car seat body, choose the properly direction
position, then release it to fixed.
EN
Summary of Contents for Nerio
