Coby TF-TV2609, Operating Instructions Manual

Page: 13 / 44

13
ENGLISH
There are internal and external types of antennas.
Connecting an Antenna
Use a coaxial cable to connect the rear panel of the TV's [ AIR ]
or [ CABLE ] terminals and the wall mount or external antenna.
When an Air signal is required, connect to the [ AIR ] terminal.
If a Cable signal is required, connect to the [ CABLE ] terminal.
If both Air, Cable are available, then connect both [ AIR ] and
[ CABLE ] terminals.
Connect the TV power cord when connecting everything else.
Avoid bending the copper tip at the center of the coaxial cable.
1
2
3
Connecting an Antenna
Turn on the TV and follow the steps in < Auto Memorizing >.
Currently all broadcast Air ( Analog, Digital ) and Cable ( Analog,
Digital ) channels have been memorized.
Change the channel you wish to watch!
■ Selecting channels directly via the numeric keypad.
eexx))
To watch channel 4: Press ‘4’
➔
Press OK .
■
To change channels using the [ CHANNEL ] button.
eexx)) Change from Channel 4 to 11: Keep pressing
the [ CHANNEL ] button until you get to Channel 11.
1
2
Viewing Air Channels
Rear of the TV
Cable Television Network
Air
or
Caution
☛
lIf the signal is too weak to be received by
the TV, purchase an additional wavelength
amplifier for better reception.
☛
Setting up an UHF antenna will receive
a digital broadcast signal.
☛
FFoorr aappaarrttm meennttss aanndd ccoonnddooss,, cchheecckk w wiitthh
rreellaatteedd ppaarrttiieess oorr yyoouurr llaannddlloorrdd ffoorr U UH HFF
rreecceeiivveerr aavvaaiillaabbiilliittyy..
☛
Some areas can receive digital broadcasts
via cable companies, therefore check with
your local cable operator.