Coby CBZ1J, Manual

Page: 8 / 36

page 8
1. To prepare for bulb replacement, unplug unit and allow it to sit for three hours to
allow the electrical charge within the unit to dissipate.
2. Twist the base tray as indicated in previous instructions.
(Fig. 1)
3. Unsnap bulb locator bracket located under unit to gain access to bulb.
(Fig. 2)
4. Wearing gloves, gently tug on the bulb to remove.
(Fig. 3)
5. Replace bulb only with proper Coby replacement bulb.
6. Wearing gloves, insert replacement bulb making sure it is properly seated into socket
that it was removed from.
7. Gently apply downward pressure on bulb until bulb snaps into socket securely.
8. Insert bulb bracket back into housing aligning so it fits snugly over base of bulb.
9. If using base tray, twist back into place on bottom of unit.
10. Plug in to test replaced bulb functions properly.
HOW TO REPLACE BULB:
NOTE:
Bulb contains mercury, dispose of properly.
To order replacement bulbs, call 1 (855) 855-0294
NOTE: If device fails to light after bulb replacement, unplug device, and following the
instructions above ensure that the bulb was correctly installed, and re-assemble
unit.
Fig. 1 Fig. 2 Fig. 3