Windshield Mounting
Dashboard Mounting
Installation
Your Detector
Nothing
Comes Close to a Cobra
®
3
Overview
Introduction
2
English
Installation
•
Where to Mount Your Unit
You will get optimum performance from your detector if you mount it at a
point approximately in the center of the vehicle, as low as possible on the
front windshield without obstructing the unit’s view of the road either to
the front or rear. You can also mount it directly on the dashboard.
The unit’s lens must not be blocked and the LaserEye should have a clear view
out the back window to allow 360° detection.
Radar and laser signals pass through glass but not through other materials
and objects. Objects that can block or weaken incoming signals include:
■
Windshield wiper blades
■
Mirrored sun screens
■
Dark tinting at the top of the windshield
■
Heated windshields currently available on some vehicles
(Instaclear for Ford, Electriclear for GM). Consult your dealer
to see if you have this option.
The LaserEye Should Have a Clear View
This manual describes the simple steps for mounting, setting up and using
your detector. It also provides helpful information about how radar and laser
guns are used and how you can interpret the alerts you receive.
Before you begin your installation, please read the Important Information
section on page A1 and use the descriptions and feature lists on pages A2 and
A3 to become familiar with your new detector.
You can extend the capabilities of your detector by adding the
Optional
Global
Positioning System Locator (GPSL) unit. See page 33 for its properties and
page 41 for ordering information.
About Your Detector
•
Display
This detector’s innovative new display provides more, easier-to-use
information than any technology to date. Using an OLED (Organic Light
Emitting Diode) screen, the display offers large graphical alerts to signals
as they are detected.
Do not be concerned when the screen goes dark under the control of Display
Timeout. The detector will function and alerts will appear as signals are
detected. You can change the user setting to keep the display On all the time
to show one of the standby screens. You can also turn On the magnetic
Compass and IntelliMute features.
Menu
EasySet Menu allows you to conveniently customize the operation of your
detector by changing the settings. You may want to start using the detector
with the factory settings and then make changes after you are more familiar
with the unit.
About This Manual
•
Once the detector is is in use, the modular descriptions in this manual can
be used as a ready reference to individual topics as needed. Each topic is
completely covered in its section and cross-references to related topics are
included where appropriate.
