Voice/Tone Setting
You can set your detector to sound alerts with either a
Voice
or a
Tone
. You can
change settings by using the
Mute
button. In Voice Alert mode, you will first hear
several tones, then a voice message announcing the type of signal detected, followed
by more tones. In Tone Alert mode, you will hear the tones only. The factory setting
is Voice Alert mode.
To Turn VG-2 and Spectre I & IV+ Alerts On and Off
While no signal
is being detected,
press and hold the
Dim
button for
four seconds.
Tone
Voice
Visual Display
On = Two Beeps
Spectre VG-2 On
V
will blink twice
in the display
Settings
Your Detector
Nothing
Comes Close to a Cobra
®
13
Settings
Your Detector
12 English
To Change From Voice Alert to Tone Alert
While no signal
is being detected,
press and hold
the
Mute
button
for two seconds.
Tone
Voice
Visual Display
One beep
Tone Alert
None
To Change From Tone Alert Back to Voice Alert
While no signal
is being detected,
press and hold the
Mute
button for
two seconds again.
Tone
Voice
Visual Display
None
Voice Alert
None
Spectre VG-2 Off
V
will blink once
in the display
Off = One Beep
VG-2 and Spectre I & IV+ Alert Settings
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from
VG-2
,
Spectre I
and
Spectre IV+
RDDs and can provide alerts when any of these or similar devices are in use
near your vehicle.
Your detector
can
be spotted by Spectre IV+ RDDs, but is invisible to VG-2 and
Spectre I RDDs. You can choose whether you want to be alerted to VG-2 and
Spectre I & IV+ RDD signals. The factory setting for VG-2 and Spectre I & IV+
alerts is Off.
IntelliMute Pro
IntelliMute Pro
prevents detection by radar detector detectors (RDDs) such as
VG-2, Spectre I and Spectre IV+ when traveling at slower speeds. It is intended
for use by experienced users only.
When IntelliMute Pro is turned On, and engine RPMs are below the IntelliMute
activation point, your detector’s radar detection circuits are turned Off to
prevent detection by RDDs.
Before IntelliMute Pro can be turned On, you must have turned On and Set the
IntelliMute activation point. (See pages 9 through 11.)
To Turn IntelliMute Pro On
While no signal
is being detected,
press and hold both
the
IntelliMute
and
City
buttons
for four seconds.
Tone
Voice
Visual Display
Two beeps
IntelliMute Pro On
c
or
h
will blink
To Turn IntelliMute Pro Off
Press and hold both
the
IntelliMute
and
City
buttons for
four seconds.
Tone
Voice
Visual Display
One beep
IntelliMute Pro Off c
or
h
will show
steady
IntelliMute Pro On
X K Ka V S
c
CAUTION
When IntelliMute Pro is On,
NO
radar signals will be detected and
NO
alerts will be given at RPMs
below
the IntelliMute activation point.
IntelliMute Button
City Button
Press and hold both
buttons simultaneously
